Alaskan Yellow Cedar — Unique Piece AYC-001
68 × 42 × 600 mm · 1.457 kg
€10.00
You are buying the exact piece shown in the photos — measured, weighed and photographed individually in our workshop in Rapla, Estonia.
| Piece number (SKU) | AYC-001 |
|---|---|
| Species | Alaskan Yellow Cedar |
| Width | 68 mm |
| Thickness | 42 mm |
| Length | 600 mm |
| Volume | 1714 cm³ |
| Surface finish | Rough sawn |
| Availability | Available — 1 of 1 |
Typical uses
Hull planking
Bends predictably for second planking and clinker work. The traditional choice for many ship model kits.
Decking
The pale tone is ideal for visible deck planking, especially when contrasted with darker caulking lines.
Carving & totem work
Alaskan Yellow Cedar carves cleanly in any direction with hand tools — a stiffer alternative to basswood with better dimensional stability. Traditionally used by Pacific Northwest peoples for totem poles and ceremonial carving. Excellent for hull carvings, figureheads, and decorative ship details.
Fine detail work
Thin sheets (0.6–1 mm) are ideal for cabin walls, framing, gratings and any detail requiring a smooth surface.
Laser engraving
Cuts and engraves cleanly with CO₂ lasers. Fine grain produces crisp edges with minimal charring.
Marquetry & inlay
Beautiful contrast against other woods. Popular for decorative inlay in furniture and instruments.
About Alaskan Yellow Cedar
Alaskan Yellow Cedar (Cupressus nootkatensis) is the hardest and most stable of the true cedars, prized by boat builders for over a century. Its pale, uniform yellow tone and exceptionally straight grain make it an excellent all-round modelling wood that finishes cleanly without fuss.
Despite being light in weight, it is remarkably dense and tough for a softwood, with very little distinction between early and late growth rings. This even structure means it bends predictably for planking and holds a crisp edge when cut thin — without the splintering common to other cedars.
Our yellow cedar is kiln-dried before milling and selected for clean, consistent colour. Its natural oils give a smooth, almost waxy surface straight from the tool, taking glue and finish well with minimal preparation.
Wood Properties
| Species | Cupressus nootkatensis |
| Origin | North American Pacific coast |
| Janka Hardness | ~2,580 N (hard for a softwood) |
| Density | ~500 kg/m³ (air dried) |
| Grain | Fine, straight and very even |
| Colour | Pale to warm yellow, uniform |
| Texture | Smooth, slightly waxy — clean finish |
| Workability | Excellent — works easily by hand or machine |
| Moisture content | 8–12% |
More applications & workshop uses
Where Alaskan Yellow Cedar is used beyond ship modelling, and what makes it work in each case.
Model making & miniatures
Alaskan yellow cedar has been a boat-building timber for over a century and carries the same advantages into ship models: light weight, very even growth rings and predictable bending make it a natural first-planking and hull-planking wood. It is equally useful for architectural models and larger display pieces where mass matters.
Fine woodworking & restoration
It is not a furniture or inlay wood — the colour is too warm and the density too low for stringing or marquetry. Where it earns its place is in carcase work behind the scenes, jigs, patterns and bending forms, and in carved elements, thanks to a grain that stays uniform in every direction.
Workshop machining
Cedar cuts fast and cleanly on CNC and scroll saw work with almost no tear-out, though it is soft enough that fine engraved detail rounds over more readily than in boxwood or hornbeam. Its low resin content and natural oils leave tooling clean, and it mills to consistent thickness without case hardening.
Carving & craft
Traditionally used for Pacific Northwest totem and ceremonial carving, yellow cedar carves cleanly with hand tools in any direction — stiffer and more stable than basswood, and less prone to crushing under the gouge. It suits figureheads, hull ornament and larger decorative work rather than small turned items.
Yellow cedar is the practical choice for volume: light, stable, inexpensive to work and forgiving to bend, which is why it dominates planking and carved work. For visible fine detail, contrast or high-wear parts, move up to pear, boxwood or hornbeam.
Alaskan Yellow Cedar — common questions
- Is Alaskan yellow cedar a hardwood?
- Botanically it is a softwood (Cupressus nootkatensis), but it is unusually hard and stable for one — harder than many true hardwoods and far more dimensionally settled than most cedars.
- Does it splinter when planked thin?
- Much less than western red cedar. The growth rings are very even, so thin planks stay coherent and bend without breaking out at tight curves.
- Does it have a strong smell?
- Freshly cut yellow cedar has a distinctive resinous scent that fades after machining and disappears once finished.
- Is it good for carving?
- Yes — it is a traditional carving timber, cutting cleanly in any direction with hand tools and holding detail better than basswood.
- Can you mill custom sizes?
- Yes. Sections and lengths are cut to order in our Rapla workshop; use the Custom Quote Calculator for pricing.